Solar water pumps are specially designed to lift water for irrigation, horticulture farms, gardens, drinking and other similar applications. These solar powered water pumps are best alternatives for areas where there is no electricity or scarcity of power supply. Neosol solar water pump systems can be easily installed and requires minimum maintenance. We manufacture and supply various models of solar water pumps, solar submersible water pumps and the specially designed modules of the system can withstand extreme weather conditions such as storm, rain and dust and are impact resistant.

Solar Submersible Pumps
MODEL : PS1200 HR/C

Overview

• Lift up to 240 m
• Flow rate up to 21 m3/h
• Simple installation
• Maintenance-free
• High reliability and life expectancy
• Cost-efficient pumping
• 2 years manufacturer's warranty against defects in material and workmanshi

Applications

• Drinking water supply
• Livestock watering
• Pond management
• Irrigation etc.
• Controlling of the pump system and monitoring of the operating states
• Mounted at surface (no submerged electronic parts)
• Two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
• Automatic reset 20 minutes after well probe turns pump off
• Protected against reverse polarity, overload and high temperature
• Speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
• Solar Operation: Integrated MPPT (Maximum Power Point Tracking)
• Battery Operation: Low voltage disconnect and restart after battery has recovered
• Enclosure: IP 54 (sealed, weatherproof)

Motor ECDRIVE 1200 HR / C

• Brushless DC motor
• Water filled
• Dynamic Slide Bearings, Material: Carbon/Ceramic
• Wetted Material: Stainless steel (AISI 316), POM, Rubber, Cable drinking water approved

Pump end (PE)

• High life expectancyr
• Non-return valve
• dry running protection (optional)
• Material: Stainless Steel (AISI 316), Rubber

For HR pumps only

• Helical rotor pump (positive displacement pump)
• Two main parts only: Stator and Rotor
• Stator: Geometry made of abrasion resistant rubber
• Rotor: Stainless Steel, Hard Chrome Plated, Abrasion Resistant
• More resistant to damage by sand than other pump types
• Self-cleaning
MODEL : PS1800 HR/C

Overview

• Lift up to 50 m
• Flow rate up to 22 m3/h
• Simple installation
• Maintenance-free
• High reliability and life expectancy
• Cost-efficient pumping
• 2 years manufacturer's warranty against defects in material and workmanship

Applications

• Drinking water supply
• Livestock watering
• Pond management
• Irrigation etc.

Controller PS1800

• Controlling of the pump system and monitoring of the operating states
• Mounted at surface (no submerged electronic parts)
• Two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
• Automatic reset 20 minutes after well probe turns pump off
• Protected against reverse polarity, overload and high temperature
• Speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
• Solar Operation: Integrated MPPT (Maximum Power Point Tracking)
• Battery Operation: Low voltage disconnect and restart after battery has recovered
• Max. efficiency 92 % (motor + controller)
• Enclosure: IP 54 (sealed, weatherproof)

Controller PS1800

• Brushless DC motor
• No electronic parts in the motor
• Water filled
• IP68, pressure balanced, unlimited submersion
• Dynamic slide bearings, material: carbon/ceramic
• Wetted Material: Stainless Steel (AISI 316), POM, Rubber, Cable rinking water approved

Pump end (PE)

• High life expectancy
• Non-return valve
• dry running protection (optional)
• Material: Stainless Steel (AISI 316), Rubber